Return to: Airline News

Fiber laser cutting machines are not omnipotent, and these materials must not be cut with it



Many people think that fiber cutting machine belongs to the category of cutting machine, and imported laser range should be very wide, the effect should be a lot better than the other way, in fact, there are special types of cutting machine parts, each cutting machine has its advantages and disadvantages, the following detailed analysis.





First of all, fiber Laser cutting machine belongs to the category of METAL cutting machine, so only cutting metal, not cutting cloth, skin, stone and other non metals, the reason is very simple, fiber laser cutting machine of the wavelength range is not within the range of the absorption material, or absorption is not appropriate, to reach the ideal cutting effect at present, it is applied to the metal cutting advantage is not obvious, of course, does not rule out future development needs in this area may.







Secondly, do not recommend long-term cut aluminum, copper and other rare metal materials of fiber laser cutting machine, because these materials are highly reflective materials (Note: cutting with high reflective plate surface smooth degree of little, mainly due to the wavelength of the laser is not in these materials ideal absorption range, the absorption effect is not good, most the energy to be reflected back, protection of the lens is easy to damage the laser head in front), long-term effect is not good, will increase the amount of use of consumables;









Finally, according to the power of the fiber laser cutting machine, the cutting thick bottom will also change. The larger the power, the larger the cutting thickness, the thinner the metal material and the faster the cutting speed. The advantage of fiber laser cutting machine is very obvious for thin plate cutt ...

News Release: Fiber laser cutting machines are not omnipotent, and these materials must not be cut with it
Submitted on: February 02, 2018 06:14:38 AM
Submitted by: gemlasersyao
On behalf of: gem-lasers.blogspot.com/2018/01/fiber-laser-cutting-machines-are-not.html
advertisement